Friday 13 April 2012

Arjac Rockfist The Anvil of Fenris

Arjac from the Space Wolves Codex
Having finished painting my own Arjac Rockfist, I thought I would use this post to look at the concept art we had of the man when the Space Wolves Codex first came out, what I did in terms of modelling in my own Arjac and finally how my model compares to the recently released official model.

From the artwork in the Space Wolves Codex we can see that Arjac has a right-handed storm shield, left-handed thunder hammer, an anvil on top of his suit of terminator armour with what appears to be a wolf pelt cloak fastened to his shoulder pad and going down his back.

The only other things to note on Arjac is that his storm shield looks huge in this picture and his thunder hammer can be thrown and cannot have any sort of cabling joining the hammer to his arm.

This then brings me on to the model I created to represent Arjac (at a time well before GW got round to releasing their own model, like many, many others out there).

The items to make storm shield/thunder hammer/anvil are talked about in the work in progress post I put up a few days. In my mind the anvil is pretty much spot on, the storm shield is the right size (i.e huge) but is more curved than the angular art work drawing and the thunder hammer I reckon looks epic, but has quite some differences from the art work.

The trickiest part of this Arjac was getting the right handed storm shield as all storm shields seem to be for the left hand only. This lead to me writing a post on converting storm shields to the right hand. In that example the arm is from a wolf claw, but with Arjac I used a right handed storm bolter arm, trimmed it down then added green stuff to add in the handle details for the shield.

I also think my Arjac head could do with a clean shave to accurately mirror the art work, but I only had the one head left when I was putting him together so I had to go with that rather than try locating a bald headed man.

I also decided with this model that I wanted the shoulder pads to be more epic than the usual terminator ones. I bought them from Ebay from a seller called Anvil Industry, their Ebay store can be found here. They needed a little bit of modification to fit onto the shoulders/below the pelt, but not much and they did fit pretty well.

The rest of the model came straight from the Space Wolves Wolf Guard Terminator box set, which meant little to do on the conversion front from this point, just the selection of the right legs and torso to suit my idea of Arjac. Having the pelts of two wolves on their helps to make him stand out above my other Wolf Guard Terminators, which he should do in his position as Grimnar's champion.

And then we had the Games Workshop release of Arjac Rockfist, which shares many of the same characteristics as the original art work, but also has a few differences.

The shield on the new model looks far to small and round to be compared to the drawing, but has a nice amount of detail on it, the thunder hammer looks a good size for smashing and throwing and has the same look as the art.

Arjac is also bald, which lines up nicely with the codex drawing, but appears to be lacking in wolf/fur pelts which appear to be present on the picture.

Arjac model released by Games Workshop
While I believe that the new model is a nice model, I also think it is lacking in, for want of a better word, epicness to really depict the pure strength and standing of the Astartes that Logan Grimnar called his champion.

While my own model may or may not deliver that feeling in everyone is not mine to say, but I feel that he is a giant that can command the stat line and story behind him. I am looking forward to running my freshly painted Arjac in battle very soon.

Thanks as always for looking, hope to see you again.

1 comment:

  1. Wonderful work. From converting the thunderhammer to go in the right hand (which can be a task) to picking a suitable shield to go with his bulky torso.

    I think you've got a great model there. My only wish is that the red on the cape were smoother in its transitions and you didn't have the pooling from the washes.

    Ron, FTW

    ReplyDelete

Thanks for your comment it is very much appreciated. I hope to hear more from you in the future!

Popular Posts